Distribution de travail : LUbuntu 18.04
Lien : https://www.openvmshobby.com/vax-vms/openvms-on-vax-simh/
util01@station40:~$ sudo apt-get install make libsdl2-dev libpng-dev libpcap-dev libvdeplug-dev bridge-utils libedit-dev
util01@station40:~$ mkdir -p RETROCOMPUTER/OPENVMS/VAX
util01@station40:~$ cd RETROCOMPUTER/OPENVMS/VAX/
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX$
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX$ git clone https://github.com/simh/simh.git
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX$ cd simh/
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/simh$
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/simh$ make -j4 vax8600
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX$ mkdir vax8600
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX$ cd vax8600/
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600$
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600$ mkdir iso
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600$ mkdir data
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600$ mkdir log
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600$ mkdir bin
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600$ cp ../simh/BIN/vax8600 bin/
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600$ cd iso/
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600/iso$
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600/iso$ wget -c http://vaxhaven.com/cd-image/AG-QSBWB-BE.iso.zip
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600/iso$ unzip AG-QSBWB-BE.iso.zip
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600/iso$ ls -lh *.ISO
-rw-r--r-- 1 util01 www-data 392M févr. 6 2013 AG-QSBWB-BE.ISO
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600/iso$
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600/iso$ mv AG-QSBWB-BE.ISO VAXVMS071.iso
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600/iso$ cd ../data/
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600/data$
Créer :
vax8600.ini
Ajouter :
; Set the memory size to 512 megabytes
set cpu 512M
; Use a TCP socket for the console
;set console telnet=5724
; Set the CPU idle detection method to VMS to improve performance when OpenVMS isn't doing anything
set cpu idle=vms
; Set the CPU to a model 8650
set cpu model=8650
; Configure an 1.5 gigabyte RA92 disk on interface RQ0
set rq0 ra92
; Attach a disk image to interface RQ0 - SimH will create this on boot
attach RQ0 /home/util01/RETROCOMPUTER/OPENVMS/VAX/vax8600/data/rq0-ra92.dsk
; Configure a CD-ROM drive (RRD40) on disk interface RQ3
set rq3 cdrom
; Attach the installation disk ISO image to interface RQ3
attach RQ3 -r /home/util01/RETROCOMPUTER/OPENVMS/VAX/vax8600/iso/VAXVMS071.iso
; Disable the RP Massbus controller
set rp disable
; Disable the RL11 cartridge disk controller
set rl disable
; Disable the RK611 cartridge disk controller
set hk disable
; Disable the RX211 floppy disk controller
set ry disable
; Disable the TS11 magnetic tape controller
set ts disable
; Disable the TUK50 magnetic tape controller
set tq disable
; Disable the DZ11 8-line terminal multiplexer
set dz disable
; Disable the LP11 line printer
set lpt disable
; Enable the Ethernet controller
set xu enable
; Set the MAC address to use for the Ethernet controller
set xu mac=08-00-2B-E5-40-03
; Attach the Ethernet controller to a TAP interface 'vaxa'
attach xu enp3s0
Pour : Attach the Ethernet controller to a TAP interface 'vaxa' Indique l'interface réseau de votre ordinateur.
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600/data$ cd ../bin/
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600/bin$
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600/bin$ ln -s ../data/vax8600.ini
util01@station40:~/RETROCOMPUTER/OPENVMS/VAX/vax8600/bin$ sudo su
[sudo] Mot de passe de util01 :
root@station40:/home/util01/RETROCOMPUTER/OPENVMS/VAX/vax8600/bin#
root@station40:/home/util01/RETROCOMPUTER/OPENVMS/VAX/vax8600/bin# ./vax8600
VAX 8600 simulator V4.0-0 Current git commit id: 0c46000d
./vax8600.ini-12> attach RQ0 /home/util01/RETROCOMPUTER/OPENVMS/VAX/vax8600/data/rq0-ra92.dsk
%SIM-INFO: RQ0: Creating new file: /home/util01/RETROCOMPUTER/OPENVMS/VAX/vax8600/data/rq0-ra92.dsk
./vax8600.ini-16> attach RQ3 -r /home/util01/RETROCOMPUTER/OPENVMS/VAX/vax8600/iso/VAXVMS071.iso
%SIM-INFO: RQ3: Unit is read only
%SIM-INFO: RQ3: '../iso/VAXVMS071.iso' Contains ODS2 File system
%SIM-INFO: RQ3: Volume Name: VAXVMS071 Format: DECFILE11B Sectors In Volume: 800000
./vax8600.ini-38> attach xu enp3s0
%SIM-INFO: Eth: opened OS device enp3s0
sim>
sim> boot rq3
%SIM-INFO: Loading boot code from internal vmb.exe
%SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk
%SYSBOOT-W-SYSBOOT Can not map SYSDUMP.DMP on the System Disk
%SYSBOOT-W-SYSBOOT Can not map PAGEFILE.SYS on the System Disk
OpenVMS (TM) VAX Version X6NO Major version id = 1 Minor version id = 0
PLEASE ENTER DATE AND TIME (DD-MMM-YYYY HH:MM) 10-JUN-2025 20:20
Configuring devices . . .
Now configuring HSC, RF, and MSCP-served devices . . .
Please check the names of the devices which have been configured,
to make sure that ALL remote devices which you intend to use have
been configured.
If any device does not show up, please take action now to make it
available.
Available device DUA0: device type RA92
Available device DUA1: device type RD54
Available device DUA2: device type RD54
Available device DUA3: device type RRD40
Available device MTA0: device type TE16
Available device MTA1: device type TE16
Available device MTA2: device type TE16
Available device MTA3: device type TE16
Available device MTA4: device type TE16
Available device MTA5: device type TE16
Available device MTA6: device type TE16
Available device MTA7: device type TE16
Enter "YES" when all needed devices are available: YES
%BACKUP-I-IDENT, Stand-alone BACKUP V7.1; the date is 10-JUN-2025 20:22:04.00
$
$ backup dua3:vms071.b/save_set dua0:
%BACKUP-I-PROCDONE, operation completed. Processing finished at 10-JUN-2025 20:22:45.50
If you do not want to perform another standalone BACKUP operation,
use the console to halt the system.
If you do want to perform another standalone BACKUP operation,
ensure the standalone application volume is online and ready.
Enter "YES" to continue: YES
%BACKUP-I-IDENT, Stand-alone BACKUP V7.1; the date is 10-JUN-2025 20:22:51.78
$
[Contrôle] + [E]
Simulation stopped, PC: 81A02F53 (BEQL 81A02F5B)
sim>
sim> boot rq0
%SIM-INFO: Loading boot code from internal vmb.exe
%SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk
%SYSBOOT-W-SYSBOOT Can not map SYSDUMP.DMP on the System Disk
%SYSBOOT-I-SYSBOOT Mapping PAGEFILE.SYS on the System Disk
%SYSBOOT-I-SYSBOOT SAVEDUMP parameter not set to protect the PAGEFILE.SYS
OpenVMS (TM) VAX Version BI71-6NO Major version id = 1 Minor version id = 0
OpenVMS VAX V7.1 Installation Procedure
Model: VAX 8650
System device: RA92 - _DUA0:
Free Blocks: 2877504
CPU type: 04-00
* Please enter the date and time (DD-MMM-YYYY HH:MM) 10-JUN-2025 20:26
*********************************************************
%SYSTEM-W-TZGMT, your local timezone has defaulted to GMT
%SYSTEM-I-SETTZ, to set your local timezone use:
$ @SYS$MANAGER:UTC$TIME_SETUP.COM
*********************************************************
On MIN or UPGRADE system startup - CLUE is not run.
%%%%%%%%%%% OPCOM 10-JUN-2025 20:26:01.15 %%%%%%%%%%%
Operator _OPA0: has been enabled, username SYSTEM
%%%%%%%%%%% OPCOM 10-JUN-2025 20:26:01.15 %%%%%%%%%%%
Operator status for operator _OPA0:
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10,
OPER11, OPER12
%%%%%%%%%%% OPCOM 10-JUN-2025 20:26:01.20 %%%%%%%%%%%
Logfile has been initialized by operator _OPA0:
Logfile is SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1
%%%%%%%%%%% OPCOM 10-JUN-2025 20:26:01.20 %%%%%%%%%%%
Operator status for operator SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10,
OPER11, OPER12
%SYSTEM-I-BOOTUPGRADE, security auditing disabled
%%%%%%%%%%% OPCOM 10-JUN-2025 20:26:01.54 %%%%%%%%%%%
Message from user JOB_CONTROL
%JBC-E-OPENERR, error opening SYS$SYSROOT:[SYSEXE]QMAN$MASTER.DAT;
%%%%%%%%%%% OPCOM 10-JUN-2025 20:26:01.54 %%%%%%%%%%%
Message from user JOB_CONTROL
-RMS-E-FNF, file not found
%LICENSE-F-EMTLDB, license database contains no license records
%SYSTEM-I-BOOTUPGRADE, security server not started
%%%%%%%%%%% OPCOM 10-JUN-2025 20:26:02.27 %%%%%%%%%%%
Message from user SYSTEM
%LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node
-LICENSE-F-NOLICENSE, no license is active for this software product
-LICENSE-I-SYSMGR, please see your system manager
%LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node
-LICENSE-F-NOLICENSE, no license is active for this software product
-LICENSE-I-SYSMGR, please see your system manager
Startup processing continuing...
If this system disk is to be used in a cluster with multiple system
disks, then each system disk must have a unique volume label. Any
nodes having system disks with duplicate volume labels will fail to
boot into the cluster.
You can indicate a volume label of 1 to 12 characters in length. If you
want to use the default name of OpenVMS071, press RETURN in response
to the next question.
* Enter the volume label for this system disk [OpenVMS071]:
* Enter name of drive holding the OpenVMS distribution media: dua3
* Is the OpenVMS media ready to be mounted? [N] y
%MOUNT-I-MOUNTED, VAXVMS071 mounted on _DUA3:
Select optional software you want to install. You can install one
or more of the following OpenVMS or DECwindows components:
o OpenVMS library - 52200 blocks
o OpenVMS optional - 19000 blocks
o OpenVMS Help Message - 10400 blocks
o OpenVMS Management Station - 20000 blocks
o DECwindows base support - 4400 blocks
o DECwindows workstation support - 23800 blocks
- 75 dots per inch video fonts - (included)
- 100 dots per inch video fonts - 6200 blocks
o DECnet-Plus networking - 80000 blocks
Space remaining on system disk: 2877324 blocks
* Do you want to install the OpenVMS library files? (Y/N) y
Space remaining on system disk: 2825124 blocks
* Do you want to install the OpenVMS optional files? (Y/N) y
Space remaining on system disk: 2806124 blocks
The Help Message utility (MSGHLP) provides online explanations
and user actions for OpenVMS messages in place of the hardcopy
OpenVMS System Messages and Recovery Procedures Reference Manual,
which is now separately orderable.
The MSGHLP database file, MSGHLP$LIBRARY.MSGHLP$DATA,
consumes approximately 10400 blocks and will be
placed by default on your system disk in SYS$COMMON:[SYSHLP]
unless you specify an alternate device when prompted.
* Do you want to install the MSGHLP database? (Y/N) y
You can install this database on your system disk in SYS$COMMON:[SYSHLP]
or on an alternate device. If you specify an alternate device, but no
directory, MSGHLP$LIBRARY.MSGHLP$DATA is placed in [HELP_MESSAGE]. When
prompted, take the default of the system disk or specify an alternate
device using this format:
device:[directory]
* Where do you want to install the MSGHLP database?[SYS$COMMON:[SYSHLP]]y
Alternate device Y does not exist.
* Where do you want to install the MSGHLP database?[SYS$COMMON:[SYSHLP]]y
Alternate device Y does not exist.
* Where do you want to install the MSGHLP database?[SYS$COMMON:[SYSHLP]]
Space remaining on system disk: 2795724 blocks
The OpenVMS Management Station is a client-server application
that provides OpenVMS system management capabilities through a
client application on a personal computer (PC) running Microsoft
Windows. The server application runs on OpenVMS systems and is
automatically installed as part of the OpenVMS operating system.
This option provides the files used to create the installation media
for the PC client software. If you want to use the OpenVMS Management
Station, you must install these files on at least one OpenVMS system to
create the installation media, which can then be used to install the
PC client on one or more PCs.
Note: To use the OpenVMS Management Station on your PC, you must be
running Digital's PATHWORKS V5.0A for DOS and Windows (or V5.1)
software.
The OpenVMS Management Station optional files consume approximately 20000
blocks and will be placed on your system disk in SYS$COMMON:[TNT.CLIENT].
* Do you want to install the optional OpenVMS Management Station files? (Y/N) y
Space remaining on system disk: 2775724 blocks
You can select DECwindows now, or you can use the DECW$TAILOR utility
to provide or remove DECwindows support after the installation.
Some media, TK50s in particular, can be very slow when tailoring on files.
You might want to select DECwindows now and tailor off unwanted files later.
NOTE: This kit does NOT contain full DECwindows.
To obtain full DECwindows, you must also install the separate
layered product, DECwindows Motif for OpenVMS VAX.
V1.2-3 is the minimum version of DECwindows Motif for OpenVMS VAX
that can be used with OpenVMS VAX V7.1.
The DECwindows components provided in this kit requires approximately
34400 blocks, broken down as follows:
o DECwindows base support - 4400 blocks
o DECwindows workstation support - 23800 blocks
- 75 dots per inch video fonts - (included)
- 100 dots per inch video fonts (optional) - 6200 blocks
You must select the DECwindows base support option if
- you plan to run DECwindows software, or
- you are installing this kit on
* a workstation or
* a VAXcluster that contains workstations, or
- you want to provide font files for Xterminals.
If you are installing this kit on a system that includes Xterminals
and you do NOT select DECwindows base support, then you will have to use
the DECW$TAILOR utility to provide font files.
* Do you want the DECwindows base support? (Y/N) y
Space remaining: 2771324 blocks
You must select the DECwindows workstation support option if
- you are installing this kit on
* a workstation or
* a VAXcluster that contains workstations, or
- you want to provide font files for Xterminals.
If you are installing this kit on a system that includes Xterminals
and you do NOT select DECwindows workstation support, then you will have
to use the DECW$TAILOR utility to provide font files.
* Do you want to install DECwindows workstation support? (Y/N) y
Space remaining: 2747524 blocks
DECwindows workstation support includes the 75 dots per inch video fonts.
All DECwindows applications run with 75 dots per inch video fonts.
By default, most systems startup with 75 dots per inch video fonts.
Certain applications can take advantage of 100 dots per inch video fonts.
For the VAXstation 4000 series machines, 100 dots per inch video fonts
are used by default. If you decide not to install 100 dots per inch
video fonts, you must edit SYS$MANAGER:DECW$PRIVATE_SERVER_SETUP.COM
to force 75 dots per inch video fonts to be the default. Otherwise,
certain applications may not space text properly.
For instructions on how to configure your system with both 75 and 100
dots per inch video fonts, see the installation guide or look at the
template command procedure SYS$MANAGER:DECW$PRIVATE_SERVER_SETUP.TEMPLATE.
* Do you want 100 dots per inch video fonts installed? (Y/N) y
Space remaining: 2741324 blocks
Beginning with OpenVMS V7.1 DECnet-Plus is provided with the
OpenVMS operating system. Digital strongly recommends that DECnet
users install DECnet-Plus. DECnet Phase IV applications are
supported by DECnet-Plus.
DECnet Phase IV is available for separate installation. Please see the
"OpenVMS V7.1 Release Notes" for important information regarding
DECnet Phase IV support.
If you plan to install DECnet Phase IV do NOT select DECnet-Plus.
* Do you want to install DECnet-Plus? (Y/N) y
Space remaining on system disk: 2661324 blocks
The following options will be provided:
OpenVMS library
OpenVMS optional
OpenVMS Help Message
OpenVMS Management Station Software -- PC files
DECwindows base support
DECwindows workstation support with:
- 75 dots per inch video fonts
- 100 dots per inch video fonts
DECnet-Plus
Space remaining on system disk: 2661324 blocks
* Is this correct? (Y/N) y
Restoring OpenVMS library save set ...
%BACKUP-I-STARTVERIFY, starting verification pass
Restoring OpenVMS optional save set ...
%BACKUP-I-STARTVERIFY, starting verification pass
Restoring OpenVMS Help Message save set ...
%BACKUP-I-STARTVERIFY, starting verification pass
Restoring OpenVMS Management Station Software -- PC files
%BACKUP-I-STARTVERIFY, starting verification pass
Restoring DECwindows base support save set ...
%BACKUP-I-STARTVERIFY, starting verification pass
Restoring DECwindows workstation support save set ...
%BACKUP-I-STARTVERIFY, starting verification pass
Restoring DECwindows 75 dots per inch video fonts save set ...
%BACKUP-I-STARTVERIFY, starting verification pass
Restoring DECwindows 100 dots per inch video fonts save set ...
%BACKUP-I-STARTVERIFY, starting verification pass
You can now remove the distribution kit from DUA3:.
Creating [VMS$COMMON] directory tree ...
In a cluster, you can run multiple systems sharing all files except
PAGEFILE.SYS, SWAPFILE.SYS, SYSDUMP.DMP, and VAXVMSSYS.PAR.
Cluster configuration cannot be done at this time because no network
is present. In order to configure a cluster you must FIRST do one
or both of the following:
o Install DECnet-Plus (or DECnet Phase IV), or
o Execute SYS$STARTUP:LAN$STARTUP.COM by removing the
comment delimiter ("!") from the line
$! @SYS$STARTUP:LAN$STARTUP
in SYS$MANAGER:SYSTARTUP_VMS.COM.
Then configure the cluster by executing the following command:
@ @SYS$MANAGER:CLUSTER_CONFIG
See the OpenVMS System Manager's Manual: Essentials for more information.
* Do you want DECwindows Motif as the default windowing system? (Y/N) y
Now we will ask you for new passwords for the following accounts:
SYSTEM, SYSTEST, FIELD
Passwords must be a minimum of 8 characters in length. All passwords
will be checked and verified. Any passwords that can be guessed easily
will not be accepted.
* Enter password for SYSTEST:
* Re-enter for verification:
%UAF-I-MDFYMSG, user record(s) updated
%VMS-I-PWD_OKAY, account password for SYSTEST verified
The SYSTEST_CLIG account will be disabled. You must re-enable
it before running UETP but do not assign a password.
%UAF-I-PWDLESSMIN, new password is shorter than minimum password length
%UAF-I-MDFYMSG, user record(s) updated
* Enter password for FIELD:
* Re-enter for verification:
%UAF-I-MDFYMSG, user record(s) updated
%VMS-I-PWD_OKAY, account password for FIELD verified
Creating RIGHTS database file, SYS$SYSTEM:RIGHTSLIST.DAT
Ignore any "-SYSTEM-F-DUPIDENT, duplicate identifier" errors.
%UAF-I-RDBCREMSG, rights database created
%UAF-I-RDBADDMSGU, identifier DEFAULT value [000200,000200] added to rights database
%UAF-I-RDBADDMSGU, identifier FIELD value [000001,000010] added to rights database
%UAF-I-RDBADDMSGU, identifier SYSTEM value [000001,000004] added to rights database
%UAF-I-RDBADDMSGU, identifier SYSTEST value [000001,000007] added to rights database
%UAF-E-RDBADDERRU, unable to add SYSTEST_CLIG value [000001,000007] to rights database
-SYSTEM-F-DUPIDENT, duplicate identifier
%UAF-I-NOMODS, no modifications made to system authorization file
%UAF-I-RDBDONEMSG, rights database modified
Creating MODPARAMS.DAT database file, SYS$SYSTEM:MODPARAMS.DAT
* Please enter the SCSNODE name: nodea
* Please enter the SCSSYSTEMID: 1027
After the installation finishes, you might want to do one or more of the
following tasks:
o DECOMPRESS THE SYSTEM LIBRARIES - To save space, many of the system
libraries are shipped in a data-compressed format. If you have
enough disk space, you can decompress the libraries for faster access.
To data expand the libraries, type:
$ @SYS$UPDATE:LIBDECOMP.COM
If you do not decompress these libraries, you will experience slower
response to the HELP and LINK commands.
o BUILD A STANDALONE BACKUP KIT - You can build a standalone backup kit
using the procedure described in the upgrade and installation supplement"
supplied for your VAX computer.
o TAILOR THE SYSTEM DISK - You might want to review the files provided or
not provided during this installation. If you find there are files
you want to remove from the system disk (TAILOR OFF) or files you want
to add (TAILOR ON), use the following utilities to perform the
desired tailoring.
OpenVMS tailoring: $ RUN SYS$UPDATE:VMSTAILOR
DECwindows tailoring: $ RUN SYS$UPDATE:DECW$TAILOR
NOTE: The tailor procedure cannot be used to TAILOR ON or TAILOR OFF
files located on an alternate disk.
=================================================================
Continuing with OpenVMS VAX V7.1 Installation Procedure.
Configuring all devices on the system ...
If you have Product Authorization Keys (PAKs) to register, you can
register them now.
* Do you want to register any Product Authorization Keys? (Y/N): y
VMS License Management Utility Options:
1. REGISTER a Product Authorization Key
2. AMEND an existing Product Authorization Key
3. CANCEL an existing Product Authorization Key
4. LIST the Product Authorization Keys
5. MODIFY an existing Product Authorization Key
6. DISABLE an existing Product Authorization Key
7. DELETE an existing Product Authorization Key
8. COPY an existing Product Authorization Key
9. MOVE an existing Product Authorization Key
10. ENABLE an existing Product Authorization Key
11. SHOW the licenses loaded on this node
12. SHOW the unit requirements for this node
99. EXIT this procedure
Type '?' at any prompt for a description of the information
requested. Press Ctrl/Z at any prompt to return to this menu.
Enter one of the above choices [1]:99
********************************************************************************
After the system has rebooted you should register any additional
Product Authorization Keys (PAKs) you have, or receive in the
future, by executing the following procedure:
$ @SYS$UPDATE:VMSLICENSE
See the OpenVMS License Management Utility Manual for any additional
information you need.
********************************************************************************
Now registering the OpenVMS operating system in the
POLYCENTER Software Installation product database
The following product will be registered:
DEC VAXVMS VMS V7.1 Transition (registration)
The following product has been registered:
DEC VAXVMS VMS V7.1 Transition (registration)
%UTC-I-UPDTIME, updating Time Zone information in SYS$COMMON:[SYSEXE]
Configuring the Local Time Zone
TIME ZONE SPECIFICATION -- Main Time Zone Menu
1) Australia 11) GMT 21) Mexico 31) Turkey
2) Brazil 12) Greenwich 22) NZ 32) UCT
3) CET 13) Hong Kong 23) NZ-CHAT 33) US
4) Canada 14) Iceland 24) Navajo 34) UTC
5) Chile 15) Iran 25) PRC 35) Universal
6) Cuba 16) Israel 26) Poland 36) W-SU
7) EET 17) Jamaica 27) ROC 37) WET
8) Egypt 18) Japan 28) ROK 38) Zulu
9) Factory 19) Libya 29) Singapore
10) GB-Eire 20) MET 30) SystemV
0) None of the above
Select the number above that best describes your location: 11
You selected GMT as your time zone.
Is this correct? (Yes/No) [YES]:
GMT Time Zone Menu
1) GMT 12) GMT10 23) GMT-7 34) GMTPLUS5
2) GMT0 13) GMT11 24) GMT-8 35) GMTPLUS6
3) GMT1 14) GMT12 25) GMT-9 36) GMTPLUS7
4) GMT2 15) GMT13 26) GMT-10 37) GMTPLUS8
5) GMT3 16) GMT-0 27) GMT-11 38) GMTPLUS9
6) GMT4 17) GMT-1 28) GMT-12 39) GMTPLUS10
7) GMT5 18) GMT-2 29) GMTPLUS0 40) GMTPLUS11
8) GMT6 19) GMT-3 30) GMTPLUS1 41) GMTPLUS12
9) GMT7 20) GMT-4 31) GMTPLUS2 42) GMTPLUS13
10) GMT8 21) GMT-5 32) GMTPLUS3
11) GMT9 22) GMT-6 33) GMTPLUS4
0) None of the above
Select the number above that best describes your location: 3
You selected GMT1 as your time zone.
Is this correct? (Yes/No) [YES]:
Default Time Differential Factor is 1:00.
The Time Differential Factor (TDF) is the difference between your
system time and Coordinated Universal Time (UTC). UTC is similar
in most repects to Greenwich Mean Time (GMT).
The TDF is expressed as hours and minutes, and should be entered
in the hh:mm format. TDFs for the Americas will be negative
(-3:00, -4:00, etc.); TDFs for Europe, Africa, Asia and Australia
will be positive (1:00, 2:00, etc.).
Enter the Time Differential Factor [1:00]:
NEW SYSTEM TIME DIFFERENTIAL FACTOR = 1:00.
Is this correct? [Y]:
DECnet-Plus will now be installed.
Media containing the DECnet-Plus kit must be available.
If you are installing OpenVMS from an Infoserver (DAD1)
or local CD-ROM, there is a DECnet-Plus kit on the CD-ROM.
If you are installing from a cartridge tape (TK50) or
from an open reel tape, you should have a DECnet-Plus kit
on cartidge tape or open reel tape.
An appropriate DECnet-Plus kit may also be available on
the Consolidated Distribution CD-ROM, or you may have a
separate DECnet-Plus kit.
NOTE: You may choose any available media for the
DECnet-Plus kit. It is NOT NECESSARY to use the same
type of media that contained the OpenVMS kit.
If you do not have a DECnet-Plus kit available, or if you
have decided NOT to install/upgrade DECnet-Plus, you can
bypass the DECnet-Plus installation by entering "EXIT"
for the "name of drive holding the DECnet-Plus kit".
* Enter name of drive holding the DECnet-Plus kit: dua3
* Is DUA3: ready to be mounted? [N] y
The following product has been selected:
DEC VAXVMS DECNET_OSI V7.1 Layered Product
Configuration phase starting ...
You will be asked to choose options, if any, for each selected product and for
any products that may be installed to satisfy software dependency requirements.
DEC VAXVMS DECNET_OSI V7.1: DECnet-Plus V7.1 for OpenVMS VAX
Copyright � Digital Equipment Corporation 1994. All rights reserved.
Digital Equipment Corporation
This product requires one of two PAKs: DVNETEND or DVNETRTG.
Do you want the defaults for all options? [YES]
Do you want to review the options? [NO]
Execution phase starting ...
The following product will be installed:
DEC VAXVMS DECNET_OSI V7.1 Layered Product
Portion done: 0%...10%...20%...30%...40%...80%...90%...100%
The following product has been installed:
DEC VAXVMS DECNET_OSI V7.1 Layered Product
********************************************************************************
Running AUTOGEN to compute the new SYSTEM parameters ...
%AUTOGEN-I-BEGIN, GETDATA phase is beginning.
%AUTOGEN-I-NEWFILE, A new version of SYS$SYSTEM:PARAMS.DAT has been created.
You may wish to purge this file.
%AUTOGEN-I-END, GETDATA phase has successfully completed.
%AUTOGEN-I-BEGIN, GENPARAMS phase is beginning.
%AUTOGEN-I-NEWFILE, A new version of SYS$MANAGER:VMSIMAGES.DAT has been created.
You may wish to purge this file.
%AUTOGEN-I-NEWFILE, A new version of SYS$SYSTEM:SETPARAMS.DAT has been created.
You may wish to purge this file.
%AUTOGEN-I-END, GENPARAMS phase has successfully completed.
%AUTOGEN-I-BEGIN, GENFILES phase is beginning.
%SYSGEN-I-EXTENDED, SYS$SYSROOT:[SYSEXE]PAGEFILE.SYS;1 extended
%SYSGEN-I-EXTENDED, SYS$SYSROOT:[SYSEXE]SWAPFILE.SYS;1 extended
%SYSGEN-I-CREATED, SYS$SPECIFIC:[SYSEXE]SYSDUMP.DMP;1 created
%SYSGEN-I-CREATED, DUA0:[SYS0.SYSEXE]ERRORLOG.DMP;1 created
%AUTOGEN-I-REPORT, AUTOGEN has produced some informational messages which
have been stored in the file SYS$SYSTEM:AGEN$PARAMS.REPORT. You may
wish to review the information in that file.
%AUTOGEN-I-END, GENFILES phase has successfully completed.
%AUTOGEN-I-BEGIN, SETPARAMS phase is beginning.
%AUTOGEN-I-END, SETPARAMS phase has successfully completed.
%AUTOGEN-I-BEGIN, REBOOT phase is beginning.
The system is shutting down to allow the system to boot with the
generated site-specific parameters and installed images.
The system will automatically reboot after the shutdown and the
installation will be complete.
SHUTDOWN -- Perform an Orderly System Shutdown
%SHUTDOWN-I-BOOTCHECK, performing reboot consistency check...
%SHUTDOWN-I-CHECKOK, basic reboot consistency check completed
%SHUTDOWN-I-OPERATOR, this terminal is now an operator's console
%OPCOM-W-NOOPCOM, the request was not sent, the OPCOM process is not running
%SHUTDOWN-I-DISLOGINS, interactive logins will now be disabled
%SET-I-INTSET, login interactive limit = 0, current interactive value = 0
%SHUTDOWN-I-STOPQUEUES, the queues on this node will now be stopped
%JBC-E-OPENERR, error opening SYS$SYSROOT:[SYSEXE]QMAN$MASTER.DAT;
-RMS-E-FNF, file not found
SHUTDOWN message from user SYSTEM at Batch 20:34:00
The system will shut down in 0 minutes; back up SOON. Please log off.
Reboot system with AUTOGENerated parameters
%SHUTDOWN-I-STOPUSER, all user processes will now be stopped
%SHUTDOWN-I-REMOVE, all installed images will now be removed
%SHUTDOWN-I-DISMOUNT, all volumes will now be dismounted
%OPCOM-W-NOOPCOM, the request was not sent, the OPCOM process is not running
%SIM-INFO: Loading boot code from internal vmb.exeCOM process is not running
Rebooting...
%SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk
%SYSBOOT-I-SYSBOOT SYSDUMP.DMP on System Disk successfully mapped
OpenVMS (TM) VAX Version V7.1 Major version id = 1 Minor version id = 0
%DECnet-I-LOADED, network base image loaded, version = 05.0C.00
%DECnet-W-NOOPEN, could not open SYS$SYSROOT:[SYSEXE]NET$CONFIG.DAT
*****************************************************************
OpenVMS VAX V7.1
You have SUCCESSFULLY installed the OpenVMS VAX Operating System.
The system is now executing the STARTUP procedure. Please
wait for the completion of STARTUP before logging in to the
system.
*****************************************************************
%STDRV-I-STARTUP, OpenVMS startup begun at 10-JUN-2025 20:35:21.83
%DCL-S-SPAWNED, process SYSTEM_1 spawned
%%%%%%%%%%% OPCOM 10-JUN-2025 20:35:26.74 %%%%%%%%%%%
Operator _NODEA$OPA0: has been enabled, username SYSTEM
%%%%%%%%%%% OPCOM 10-JUN-2025 20:35:26.74 %%%%%%%%%%%
Operator status for operator _NODEA$OPA0:
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10,
OPER11, OPER12
%%%%%%%%%%% OPCOM 10-JUN-2025 20:35:26.74 %%%%%%%%%%%
Logfile has been initialized by operator _NODEA$OPA0:
Logfile is NODEA::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1
%%%%%%%%%%% OPCOM 10-JUN-2025 20:35:26.75 %%%%%%%%%%%
Operator status for operator NODEA::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10,
OPER11, OPER12
%%%%%%%%%%% OPCOM 10-JUN-2025 20:35:26.82 %%%%%%%%%%%
Message from user AUDIT$SERVER on NODEA
%AUDSRV-I-NEWSERVERDB, new audit server database created
%%%%%%%%%%% OPCOM 10-JUN-2025 20:35:26.89 %%%%%%%%%%%
Message from user AUDIT$SERVER on NODEA
%AUDSRV-I-REMENABLED, resource monitoring enabled for journal SECURITY
%%%%%%%%%%% OPCOM 10-JUN-2025 20:35:26.89 %%%%%%%%%%%
Message from user AUDIT$SERVER on NODEA
%AUDSRV-I-NEWOBJECTDB, new object database created
%SET-I-NEWAUDSRV, identification of new audit server process is 0000020A
%%%%%%%%%%% OPCOM 10-JUN-2025 20:35:26.99 %%%%%%%%%%%
Message from user JOB_CONTROL on NODEA
%JBC-E-OPENERR, error opening SYS$COMMON:[SYSEXE]QMAN$MASTER.DAT;
%%%%%%%%%%% OPCOM 10-JUN-2025 20:35:26.99 %%%%%%%%%%%
Message from user JOB_CONTROL on NODEA
-RMS-E-FNF, file not found
%LICENSE-F-EMTLDB, license database contains no license records
%%%%%%%%%%% OPCOM 10-JUN-2025 20:35:27.27 %%%%%%%%%%%
Message from user SYSTEM on NODEA
%SECSRV-E-NOPROXYDB, cannot find proxy database file NET$PROXY.DAT
%RMS-E-FNF, file not found
%%%%%%%%%%% OPCOM 10-JUN-2025 20:35:27.28 %%%%%%%%%%%
Message from user SYSTEM on NODEA
%SECSRV-E-NOPROXYDB, cannot find proxy database file NET$PROXY.DAT
%RMS-E-FNF, file not found
%%%%%%%%%%% OPCOM 10-JUN-2025 20:35:27.28 %%%%%%%%%%%
Message from user SYSTEM on NODEA
%SECSRV-I-SERVERSTARTINGU, security server starting up
%%%%%%%%%%% OPCOM 10-JUN-2025 20:35:27.32 %%%%%%%%%%%
Message from user SYSTEM on NODEA
%SECSRV-I-CIASTARTINGUP, breakin detection and evasion processing now starting up
Copyright (c) Digital Equipment Corporation 1996. All rights reserved.
%NET$STARTUP-W-NONETCONFIG, this node has not been configured to run DECnet-Plus for OpenVMS
use SYS$MANAGER:NET$CONFIGURE.COM if you wish to configure DECnet
%NET$STARTUP-I-OPERSTATUS, DECnet-Plus for OpenVMS operational status is OFF
%%%%%%%%%%% OPCOM 10-JUN-2025 20:35:28.30 %%%%%%%%%%%
Message from user SYSTEM on NODEA
%LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node
-LICENSE-F-NOLICENSE, no license is active for this software product
-LICENSE-I-SYSMGR, please see your system manager
%LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node
-LICENSE-F-NOLICENSE, no license is active for this software product
-LICENSE-I-SYSMGR, please see your system manager
Startup processing continuing...
%DECdtm-F-NODECnet, the TP_SERVER process was not started because either:
o DECnet-Plus is not started or is not configured, or
o The SYS$NODE_FULLNAME logical name is not defined
This could be because when you installed DECnet-Plus and were prompted
for the system's full name, you specified a local name instead of a
DECdns or Domain name.
If you want to use DECdtm services, make sure that DECnet-Plus is started and
configured and that SYS$NODE_FULLNAME is defined, then use the following
command to start the TP_SERVER process:
$ @SYS$STARTUP:DECDTM$STARTUP.COM
%%%%%%%%%%% OPCOM 10-JUN-2025 20:35:28.50 %%%%%%%%%%%
Message from user AUDIT$SERVER on NODEA
Security alarm (SECURITY) and security audit (SECURITY) on NODEA, system id: 1027
Auditable event: Audit server starting up
Event time: 10-JUN-2025 20:35:28.48
PID: 00000203
Username: SYSTEM
%UAF-I-RDBADDMSG, identifier SYS$NODE_NODEA value %X80010000 added to rights database
%SET-I-INTSET, login interactive limit = 64, current interactive value = 0
SYSTEM job terminated at 10-JUN-2025 20:35:28.97
Accounting information:
Buffered I/O count: 1376 Peak working set size: 950
Direct I/O count: 606 Peak page file size: 5250
Page faults: 6384 Mounted volumes: 0
Charged CPU time: 0 00:00:05.19 Elapsed time: 0 00:00:07.80
Welcome to OpenVMS (TM) VAX Operating System, Version V7.1
Username:
Username: system
Password:
%LICENSE-I-NOLICENSE, no license is active for this software product
%LOGIN-S-LOGOPRCON, login allowed from OPA0:
Welcome to OpenVMS (TM) VAX Operating System, Version V7.1
$
Via [Contrôle] + [E].
$
Simulation stopped, PC: 9E50F547 (BBC #3,26C(R3),9E50F59B)
sim> quit
Goodbye
%SIM-INFO: Eth: closed enp3s0
root@station40:/home/util01/RETROCOMPUTER/OPENVMS/VAX/vax8600/bin#
root@station40:/home/util01/RETROCOMPUTER/OPENVMS/VAX/vax8600/bin# ./vax8600
VAX 8600 simulator V4.0-0 Current git commit id: 0c46000d
./vax8600.ini-12> attach RQ0 /home/util01/RETROCOMPUTER/OPENVMS/VAX/vax8600/data/rq0-ra92.dsk
%SIM-INFO: RQ0: '../data/rq0-ra92.dsk' Contains ODS2 File system
%SIM-INFO: RQ0: Volume Name: OPENVMS071 Format: DECFILE11B Sectors In Volume: 2940951
./vax8600.ini-16> attach RQ3 -r /home/util01/RETROCOMPUTER/OPENVMS/VAX/vax8600/iso/VAXVMS071.iso
%SIM-INFO: RQ3: Unit is read only
%SIM-INFO: RQ3: '../iso/VAXVMS071.iso' Contains ODS2 File system
%SIM-INFO: RQ3: Volume Name: VAXVMS071 Format: DECFILE11B Sectors In Volume: 800000
./vax8600.ini-38> attach xu enp3s0
%SIM-INFO: Eth: opened OS device enp3s0
sim>
sim> boot rq0
%SIM-INFO: Loading boot code from internal vmb.exe
%SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk
%SYSBOOT-I-SYSBOOT SYSDUMP.DMP on System Disk successfully mapped
OpenVMS (TM) VAX Version V7.1 Major version id = 1 Minor version id = 0
%DECnet-I-LOADED, network base image loaded, version = 05.0C.00
%DECnet-W-NOOPEN, could not open SYS$SYSROOT:[SYSEXE]NET$CONFIG.DAT
$! Copyright (c) 1996 Digital Equipment Corporation. All rights reserved.
%STDRV-I-STARTUP, OpenVMS startup begun at 10-JUN-2025 20:50:13.99
%DCL-S-SPAWNED, process SYSTEM_1 spawned
%%%%%%%%%%% OPCOM 10-JUN-2025 20:50:19.05 %%%%%%%%%%%
Operator _NODEA$OPA0: has been enabled, username SYSTEM
%%%%%%%%%%% OPCOM 10-JUN-2025 20:50:19.05 %%%%%%%%%%%
Operator status for operator _NODEA$OPA0:
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10,
OPER11, OPER12
%%%%%%%%%%% OPCOM 10-JUN-2025 20:50:19.11 %%%%%%%%%%%
Logfile has been initialized by operator _NODEA$OPA0:
Logfile is NODEA::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;2
%%%%%%%%%%% OPCOM 10-JUN-2025 20:50:19.11 %%%%%%%%%%%
Operator status for operator NODEA::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;2
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER, SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8, OPER9, OPER10,
OPER11, OPER12
%SET-I-NEWAUDSRV, identification of new audit server process is 0000020A
%%%%%%%%%%% OPCOM 10-JUN-2025 20:50:19.40 %%%%%%%%%%%
Message from user JOB_CONTROL on NODEA
%JBC-E-OPENERR, error opening SYS$COMMON:[SYSEXE]QMAN$MASTER.DAT;
%%%%%%%%%%% OPCOM 10-JUN-2025 20:50:19.40 %%%%%%%%%%%
Message from user JOB_CONTROL on NODEA
-RMS-E-FNF, file not found
%LICENSE-F-EMTLDB, license database contains no license records
%%%%%%%%%%% OPCOM 10-JUN-2025 20:50:19.88 %%%%%%%%%%%
Message from user SYSTEM on NODEA
%SECSRV-E-NOPROXYDB, cannot find proxy database file NET$PROXY.DAT
%RMS-E-FNF, file not found
%%%%%%%%%%% OPCOM 10-JUN-2025 20:50:19.89 %%%%%%%%%%%
Message from user SYSTEM on NODEA
%SECSRV-E-NOPROXYDB, cannot find proxy database file NET$PROXY.DAT
%RMS-E-FNF, file not found
%%%%%%%%%%% OPCOM 10-JUN-2025 20:50:19.89 %%%%%%%%%%%
Message from user SYSTEM on NODEA
%SECSRV-I-SERVERSTARTINGU, security server starting up
%%%%%%%%%%% OPCOM 10-JUN-2025 20:50:19.91 %%%%%%%%%%%
Message from user SYSTEM on NODEA
%SECSRV-I-CIASTARTINGUP, breakin detection and evasion processing now starting up
Copyright (c) Digital Equipment Corporation 1996. All rights reserved.
%NET$STARTUP-W-NONETCONFIG, this node has not been configured to run DECnet-Plus for OpenVMS
use SYS$MANAGER:NET$CONFIGURE.COM if you wish to configure DECnet
%NET$STARTUP-I-OPERSTATUS, DECnet-Plus for OpenVMS operational status is OFF
%%%%%%%%%%% OPCOM 10-JUN-2025 20:50:21.55 %%%%%%%%%%%
Message from user SYSTEM on NODEA
%LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node
-LICENSE-F-NOLICENSE, no license is active for this software product
-LICENSE-I-SYSMGR, please see your system manager
%LICENSE-E-NOAUTH, DEC VAX-VMS use is not authorized on this node
-LICENSE-F-NOLICENSE, no license is active for this software product
-LICENSE-I-SYSMGR, please see your system manager
Startup processing continuing...
%DECdtm-F-NODECnet, the TP_SERVER process was not started because either:
o DECnet-Plus is not started or is not configured, or
o The SYS$NODE_FULLNAME logical name is not defined
This could be because when you installed DECnet-Plus and were prompted
for the system's full name, you specified a local name instead of a
DECdns or Domain name.
If you want to use DECdtm services, make sure that DECnet-Plus is started and
configured and that SYS$NODE_FULLNAME is defined, then use the following
command to start the TP_SERVER process:
$ @SYS$STARTUP:DECDTM$STARTUP.COM
%%%%%%%%%%% OPCOM 10-JUN-2025 20:50:22.17 %%%%%%%%%%%
Message from user AUDIT$SERVER on NODEA
Security alarm (SECURITY) and security audit (SECURITY) on NODEA, system id: 1027
Auditable event: Audit server starting up
Event time: 10-JUN-2025 20:50:22.12
PID: 00000203
Username: SYSTEM
%SET-I-INTSET, login interactive limit = 64, current interactive value = 0
SYSTEM job terminated at 10-JUN-2025 20:50:22.76
Accounting information:
Buffered I/O count: 1095 Peak working set size: 779
Direct I/O count: 481 Peak page file size: 5250
Page faults: 4770 Mounted volumes: 0
Charged CPU time: 0 00:00:04.87 Elapsed time: 0 00:00:08.91
Welcome to OpenVMS (TM) VAX Operating System, Version V7.1
Username: system
Password:
%LICENSE-I-NOLICENSE, no license is active for this software product
%LOGIN-S-LOGOPRCON, login allowed from OPA0:
Welcome to OpenVMS (TM) VAX Operating System, Version V7.1
Last interactive login on Tuesday, 10-JUN-2025 20:45
$